rnes/STATE.md

Status

Done

• Repo set up, backed up the original game ROMs to roms/backup (gitignored, stays local)
• Got a full set of CPU test ROMs in roms/test/cpu: kevtris nestest (with reference log) plus the blargg suite (instr tests, timing, interrupts, dummy reads, reset checks)
• Cartridge module done and working (src/cartridge.rs):
  • iNES header parser (magic, PRG/CHR sizes, mapper, mirroring, flags)
  • Mapper 0 (NROM) support only: 16KB PRG mirroring, 32KB direct, CHR-ROM and CHR-RAM (zeroed 8KB buffer)
  • read_prg/read_chr/write_chr with debug_assert guards
  • Split from_file (thin I/O wrapper) / parse_data (pure parser) for testability
  • 8 unit tests, all passing (header, PRG mapping, error cases, CHR-RAM roundtrip)
• Bus module done (src/bus.rs):
  • Bus trait (read/write) so the CPU is decoupled from the concrete memory layout
  • NesBus: 2KB mirrored CPU RAM, cartridge PRG routing, PPU/APU/SRAM/expansion regions stubbed (return 0)
• CPU skeleton done (src/cpu.rs):
  • Flag bit constants, registers (A/X/Y/SP/PC/P), set/clear/flag helpers, set_zp_flags
  • Memory helpers: fetch, fetch16, read, write, read16, push, pop
  • All 10 addressing mode helpers, including the JMP ($xxxx) page-wrap bug and page-cross cycle penalties
  • First 3 opcodes implemented (JMP abs, LDX imm, STX zp)
  • step dispatch shell + trace in nestest format
  • set_test_start for the nestest harness
• nestest harness working (main.rs): loads nestest.nes, runs from $C000 with CYC:7, dumps trace to ours.log
• Batch 1 done (subroutines + stack): JSR, RTS, PHA, PLA, PHP, PLP, RTI, BRK, plus NOP and SEC as quick wins. Verified SP:FD->FB across JSR (push high-then-low works)
• Batch 2 done (branches): all 8 branches (BEQ/BNE/BCC/BCS/BPL/BMI/BVC/BVS) via one shared branch() routine with condition param. Taken = +3 cycles, page-cross = +1 more. Verified both taken and not-taken paths in the log
• Flag set/clear ops done (part of Batch 10): CLC, CLI, CLV, CLD, SEI, SED (SEC done in Batch 1). SEI/SED set, the rest clear. Fixed a real bug where SEI/SED were clearing instead of setting
• Trace now matches the nestest reference log through line 22 (C754 A9, CYC:61), field-for-field (PC/A/X/Y/P/SP/CYC verified by label-comparison script). Next panic is on A9 (LDA immediate) at line 22, top of Batch 3
• trace bytes are length-aware via opcode_len (fixed-width byte field, columns align for awk diff)

Next

Finish the official CPU. Nestest analysis findings: the full 8991-line log tests illegal opcodes too (225 distinct opcodes total; first illegal is 0x04 at line 5004). So the official-only CPU is verified against lines 1-5003, then panics on 0x04 by design. Official opcodes never seen in the log: BRK 0x00, CLI 0x58.

CPU implementation batches (by family, ordered by nestest log frequency):

• Batch 1 - DONE (see Done section)
• Batch 2 - DONE (branches, see Done section)
• Batch 3 - Loads: LDA 8 modes, LDX 5 modes, LDY 5 modes (share load + set_zp_flags). Next up
• Batch 4 - Stores: STA 7 modes, STX 3, STY 3 (share store core, no flag changes)
• Batch 5 - Compares: CMP 8 modes, CPX 3, CPY 3 (set C/Z/N, no store)
• Batch 6 - Arithmetic: ADC 8 modes, SBC 8 modes (N/V/C/Z, decimal flag inert), BIT 2 modes
• Batch 7 - Logic: AND, ORA, EOR (8 modes each)
• Batch 8 - Inc/Dec: INC/DEC 4 modes each (RMW), INX, INY, DEX, DEY
• Batch 9 - Shifts: ASL, LSR, ROL, ROR (accumulator + 4 memory modes each, RMW)
• Batch 10 - PARTIAL: flag ops done (CLC/CLI/CLV/CLD/SEI/SED, plus SEC/NOP). Remaining: JMP ind 6C, transfers TAX/TAY/TXA/TYA/TSX/TXS

Rules for each batch:

• Add the opcode's length to opcode_len in the same edit (never let them drift)
• Re-diff after each batch (cargo run > ours.log + awk column compare)
• Check base cycles per mode, feed page-cross extra into the cycle total

Verification for this phase:

• All 151 official opcodes implemented
• Trace matches lines 1-5003 field-for-field (PC/A/X/Y/P/SP/CYC)
• cargo build clean
• Commit + update STATE.md

After official CPU is done (follow-ups):

• Add MMC1 (mapper 1) to cartridge so blargg official_only.nes / all_instrs.nes can run (authoritative official check)
• Run blargg mapper-0 suite (coredump, cpu_timing_test, ram_after_reset, registers)
• Then the illegal-opcode phase for the full 8991-line nestest pass
• Then bus/PPU/timing, GUI (egui + winit) come after the CPU milestone

Decisions

• No external dependencies yet, keeping it pure std until the GUI milestone
• GUI choice: egui + winit (decided, not yet used)
• Scope: cartridge + CPU first, verified headless before graphics
• Bus is a trait (impl Bus) so the CPU works against any memory layout (real bus, test bus, debug bus)
• Flags stored as a raw u8 with named bit-mask constants (FLAG_CARRY etc.)
• opcode length is a growing match in opcode_len() (returns u8); migrate to a full 256-entry table when it gets big
• trace diff compares PC + A/X/Y/P/SP/CYC, ignoring disassembly/PPU columns
• Mapper 0 first, other mappers (MMC1, CNROM) implemented after CPU works
• Test ROMs are homebrew/open, no ethics issue; game backups stay in gitignored roms/backup